启动救生艇艇机

  启动救生艇艇机                      Start the lifeboat engine 一．登艇前：     Before embarkation   1. 切断充电电源，拔掉充电插头。     Cut electricity supply.   2. 检查螺旋桨附近有无障碍物。     Ensure that no obstruction at the propeller area. 二．启动前检查：     Check before starting    1.检查燃油箱，曲轴箱滑油，变速齿轮箱滑油的油位及冷却水水位是否正常。     Check fuel oil, tube lubricate oil, gear box lubricate oil and cooling water level.   2.检查离合器是否在空当位置。     Check the clutch in neutral position 三．启动     Start    1.将红色电源钥匙插进main 或EMCY位置，选择电池，顺时针旋转90度     Put the red key into the "main" or "emcy" key hole to choose power ,turn it clockwise 90 degree.   2.转动START旋钮，至start位置，启动成功后松开旋钮     Turn the start switch to "start"position, loose it when the engine start to run   4.检查油压，水位是否正常     Check the fuel oil pressure and cooling water level   5.将离合器，置于正车，倒车位置，检查是否正常     Put the clutch at ahead/astern position, check working condition of the propeller. 四．停机     Stop    1.拉出STOP拉杆，完全停下后将拉杆复位     Pull the "stop" lever, reset it after the engine stopped   2.拔出钥匙，电源切断     Take out the key ,power supply is shut down.  

本文关键字：救生艇  操作规程，机械设备 - 操作规程