空气压缩机充气操作规程

  空气压缩机充气操作规程         Operation procedure for air compressor 1.在阀门关闭和日期及滑油位检查之后将充气管与钢瓶连接。  Mount the hose connecter or with manometer on the valve, while the valve is closed, and only after you check the approved date and tube oil . 2.如果马达运转正常，打开排水阀和压缩机。  Open drainage valve and start the compressor . 3.在关闭排水阀之前等待几分钟排掉冷凝物。  Wait a few minutes before closing the drainage valves to blow away the remaining condensate. 4.关闭排水阀，检查安全阀门是否达到设定压力，如果安全阀没有工作，立即停止以上操作。  Close the drainage valves,test the safety valve by allowing the pressure to be the set valve pressure ,if the safety valve dose not work , stop the filling procedure quickly! 5.一旦钢瓶达到设定压力，关闭供气阀，打开排水阀，直到压力表和钢瓶之间没有压力之后拆掉供气管。  As soon as the bottle reached the set pressure ,close the fill valve and open the drain valves,wait until the manometer gives no pressure left and remove fill hose.  

本文关键字：空气压缩机  操作规程，机械设备 - 操作规程